|
EMC
Testing and Consultancy |
|
|
METECC www.metecc.co.uk |
| METECC offers EMC pre-compliance testing, consultancy and training. See our services page for more details.
We can guide you through the minefield and help you on the road to compliance
- contact us for full details.
|
|
 |
| |
| Services: |
Pre-Compliance
EMC & R&TTE testing |
| |
EMC
& R&TTE design development |
| LVD
Testing |
| LVD
design development |
| EMC,
R&TTE & LVD Consultancy |
| Interpretation
of directives |
| Incorporation
of EC directives into existing Q.A. |
| procedures |
| Assistance
with documentation, TCFs, test reports etc |
| Advice
& assistance with setting up ‘in house’ test |
| facilities |
| Advice
& cost effective testing for ‘Continued |
| Conformance’ strategies |
| Design
& delivery of training courses either at METECC |
| site or ‘on site’ |
|
| Typical Tests: |
Radiated
Emissions in the range 30MHz to 1GHz measured at 3m |
|
Conducted
Emissions in the range 0.15MHz to 30MHz |
|
|
Conducted
Emissions in the range 0.01MHz to 400MHz (voltage clamp) |
| Harmonics
& Flicker |
| Fast
Transient burst immunity up to ± 4kV (direct
and clamp coupling) |
| Radiated
Immunity in the range 27MHz to 1GHz at 3 & 10V/m (up to 30V/m for most
of the frequency range) |
| Radiated
Immunity at 900MHz, pulse modulated at up to 30V/m |
| RF
Conducted Immunity in the range 10kHz-400MHz up to 10Vrms
(injection clamp & M2, M3, S1 CDN coupling) |
| Electrostatic
discharge up to 15kV (Air) & 9kV (Contact) |
| Surges
up to ± 4kV (Common & differential mode) |
| Voltage
Dips & Variations |
| Power
Magnetic Field up to 200A/m (total immersion method) |
| |
| Conditions of use: |
The EMC
facility is only available for hire with an engineer to both operate |
|
the equipment and
provide practical EMC related advice. |
|
The EMC
facility is hired to customers on an hourly basis so only the
time |
|
actually used will be
invoiced. |
|
It
should be clearly understood that the METECC facility is not NAMAS approved |
|
and as such is suitable
for either pre-compliance development/confidence |
|
testing or for gathering
evidence for a
customers own self-certification purposes. |
|
|
| |
|
For
further information
Contact:
Peter Metcalfe
|
|
|
|
|
Home